MCB,ELCB,button

Expiry date: 2009-04-02
The product, used to protect line-conductor and overload, and short-circuit of small seale motor, is mainly for protection of circuit with AC 220V and 50Hz/60Hz >>

Expiry date: 2009-05-26
PL60 Button Indicating Lamp can be used in the circuit controlling system, of which the AC is 50Hz or 60Hz and voltage is up to 230V, to control the magnetic fo >>

Expiry date: 2009-05-26
SD60 isolator
SD isolator is the newly developed product by our company. It has the characteristics of small volume, convenient installation and nice appearanc >>

Expiry date: 2009-05-26
M60 high-voltage mini circuit breaker is mainly used as the protector against overloaded and short circuit under the Alternating current 50Hz or 60 Hz, rated vo >>

Expiry date: 2009-04-02
L60 Indicator light is used as an indicating signal, pre-placed signal, accident signal and other signal indicators for line of telecommunication, electric in t >>

Expiry date: 2009-04-02
SD60 Surge Protector Device SPD has two thunderbolt protection chips, one normal chips and a spare chip in the module. When the normal chip comes across thunder >>

Expiry date: 2009-04-02
GAB3-63(C65N) MCB is an all new high performance current limiting device with the ability to disconnect short circuits of up to 10kA., which is the newest model >>

Expiry date: 2009-04-02
GAB4-63 series circuit breaker is used in lighting distribution system or motor distribution system for protecting overload and short-circuits in the system. Th >>

Expiry date: 2009-04-02
K series mini circuit breaker is mainly suitable for overload and short circuit protection.It is especially used for illumination and distribution in industry a >>

Expiry date: 2009-04-02
GAB8-63 mini circuit breaker is mainly suitable for overload and short circuit protection. It is especially used for illumination and distribution in industry a >>

Expiry date: 2009-04-02
The circuit breakers are suitable used in AC and DC 32A and below electric circuits of 50Hz,up to 380V and up to DC250V respectively, for protection of electric >>

Expiry date: 2009-04-02
Specifications
Electrical Specification
Conform to standard of electrical: EN60898(IEC898) GB10963-99
Rated current(Ue): 230V/400V;50/60HZ
Rated break >>

Expiry date: 2009-04-02
The item is accordance with standards of VDE 0664, CEE27, and BS 4293 etc., applying to the circuit of AC 50/60Hz, 240V single phase, 415V three phases and belo >>

Expiry date: 2009-04-02
The Residual Current Device (RCD) NFIN is in conformity with the standard of IEC 1008, VDE 0664, CEE27, and BS 4293.
It can cut off the fault circuit immediate >>

Expiry date: 2009-05-26
BY1 Surge Protective Device can be used in th entrance of th low tension power supply net of 220V, 380V to protect the electrical appliance against damage from >>

Expiry date: 2009-05-26
DPNL Leakage protective breaker, is used in the signal phase residual circuit of AC 50Hz/60Hz, rated voltage 230V, used as electron shock protection. It can pro >>

Expiry date: 2009-04-02
DPNL Leakage protective breaker, is used in the signal phase residual circuit of AC 50Hz/60Hz, rated voltage 230V, used as electron shock protection. It can pro >>

Expiry date: 2009-04-02
It has a residual current operated electromechanical release which operates without any auxiliary source of supply to open a circuit automatically in the case o >>

Expiry date: 2009-04-02
The Residual Current Device (RCD) NFIN is in conformity with the standard of IEC 1008, VDE 0664, CEE27, and BS 4293.
It can cut off the fault circuit immediate >>

Expiry date: 2009-04-02
R60E electronic leakage circuit breaker is designed to the circuit which is under the AC 50/60 Hz; of which the rated voltage is no higher than 400V and the rat >>